stevemitchell
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 5
Activity overview
Latest activity by stevemitchell-
stevemitchell commented,
Perfect! I've turned all of those on out of my gateway. Since I have to define them individually, I wanted to make sure I was sending as much data as possible.
-
stevemitchell created a post,
List of NMEA 0183 sentences supported?
Do you have a full list of all of the NMEA 0183 sentences that FloatHub can consume and support? I have an upstream gateway that the FloatHub is connected to, and I need to define which sentences c...
-
stevemitchell commented,
I have not been able to change the configuration of the downstream device to validate wind data is being sent. It is showing up on other instruments and elsewhere, so I am pretty sure its configure...
-
stevemitchell commented,
Hmmm no the instrument should have been on - its always on. I wonder if MWV is calculated based on some other value such as moving through the water? I see wind data on the NMEA 2000 bus, which is ...
-
stevemitchell commented,
I do not see that sentence anywhere when I telnet into the FloatHub on port 2319. I have telnetted into the multiplexer, which the FloatHub is directly connected to, and I see that sentence there b...
-
stevemitchell commented,
Yes, I have a lot of monitoring systems :) It is a disease of sorts. I am using LiFePO4 batteries, so the voltage is very very consistent, and the fridge itself uses an optimizer product so it sho...
-
stevemitchell commented,
The wind instrument is on the same input as the depth/STW instruments. There is a downstream multiplexer, but it is combining it from many other sources (see https://sailbits.com/grace/ for a full ...
-
stevemitchell commented,
Thanks! I set mine to 20 minutes just to be safe!
-
stevemitchell created a post,
iOS or Android App?
Are there any plans for apps for iOS or Android? Many other manufacturers have specifically built apps to make configuring and controlling their devices easier.
-
stevemitchell created a post,
Voltage inconsistencies
I have seen very random voltage drops from FloatHub that also generate alerts, showing voltage at a much lower level than is actually true. I have at least 6 other systems monitoring the voltage, a...