
FloatHub Support Team
- Total activity 210
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 76
Activity overview
Latest activity by FloatHub Support Team-
FloatHub Support Team commented,
Official comment The only way (currently) to see other data in the trip share is via the info window pop up. That shows (textually) all the data, but not in graph/plot form. We have experimented with sharing plots ...
-
FloatHub Support Team commented,
Very valuable to have feedback like this, gives us lots of edge cases to use as we work through the improvements.
-
FloatHub Support Team commented,
Thanks for pointing out, we will review. We're still fine tuning the smoothing, but in any case this should have been caught by the "overall distance" filter (the overall distance was trivial).
-
FloatHub Support Team commented,
Yup, just wire a float switch or other sensor that carries voltage to one of the pump lines. You'll see any time it cycles on and/or off and get set up alerts for either event.
-
FloatHub Support Team commented,
The easiest way to monitor shore power is generally to connect the output power from any adaptor/transformer to one of the input voltage connections. You can then see voltage levels on the website ...
-
FloatHub Support Team commented,
We can see the issue here. With the spidering in your GPS fix, sometimes the starting point for the trip get sets sufficiently far away from your actual home point that you never get "home". Right ...
-
FloatHub Support Team commented,
Interesting, and good point about immediacy. We'll have a look at your logs and see why you're not getting faster "return to starting point" trip results.
-
FloatHub Support Team commented,
Thanks for the question. We do have a NMEA-2000 version in the works, but it is still at least several months away from commercial availability. We're not at a point where we can guarantee a delive...
-
FloatHub Support Team commented,
Official comment There are currently at least two ways to get raw data: 1. For any trip, you can download all of the raw data in csv, xsl, or kml formats. 2. You can actually configure the device to transmit with y...
-
FloatHub Support Team created an article,
New Feature: Trip Sharing
After we announced the ability to share your vessel's current status back in December, we received many requests to support the same functionality for Trips. We are happy to announce that after s...